Still LXT 120, Оригинальное руководство пользователя

Страница: 258 / 324

Securing the industrial truck for
transport
DANGER
The industrial truck can tear loose
–
Attach harnesses only to the lifting points speci-
fied here.
–
Only use harnesses with a sufficient traction ca-
pacity.
–
Only use harnesses with sufficient tensile
strength.
Preparing for transport
–
Ensure that the key switch is switched off.
–
Disconnect the battery male connector.
Lashing down
Lash down the industrial truck with tension
belts that are routed along both sides and
around the truck front and the truck rear. At-
tach the ends of the tension belts to the lash-
ing points on the transport vehicle.
Lashing down the truck front:
–
Guide the tension belts around the truck
front as shown in the adjacent diagram.
–
Route the tension belts towards the rear
on the right-hand and left-hand sides and
secure them to the specified lashing points
on the transport vehicle.
–
Where tension belts are routed over body
edges, cushion these areas with protection,
such as rubber mats.
Lashing down the truck rear:

Operation
4
Transporting the industrial truck
246 50078078001 EN - 07/2022 - 04