Still LXT 120 Скачать руководство пользователя страница 192

Страница: 192 / 324

Maximum support load

The maximum permissible support load of the

manual tow coupling is 100 kg.

Operating the manual 2-level

tow coupling (variant)

Important information

NOTE

Only use STILL approved tow couplings for

the tow tractors and the platform tractors.

NOTE

Only the authorised service centre is permitted

to mount or replace the tow couplings. The

approved fasteners, adapter plates and speci-

fied tightening torques must be used for this

purpose.

NOTE

When mounting a different tow coupling, the

authorised service centre must check whether

this tow coupling is permissible for this indus-

trial truck.

NOTE

Observe the chapter entitled "Towing guide-

lines" with regard to towed loads with un-

braked trailers.

Operation

Trailer and load

180

50078078001 EN - 07/2022 - 04

Содержание LXT 120





































































































































































































































































































































Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды

Still LXT 120, Оригинальное руководство пользователя

Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды