Still LXT 120 Скачать руководство пользователя страница 186

Страница: 186 / 324

–

To move the industrial truck forwards or

backwards, push the buttons (3) or (4) on

the control panels on the front or rear. With

each push of a button, the industrial truck

moves over a defined short distance and

then stops again. To continue, push the but-

ton again. The length of the distance travel-

led is adjustable. Please contact the author-

ised service centre for this adjustment.

Warnings for trailer operation

Towing trailers poses some dangers for the

driver and the surrounding area. The following

warnings draw attention to the dangers.

DANGER

People can become trapped between the industrial

truck and the trailer.

–

When coupling, ensure that there are no people

present between the industrial truck and the trail-

er.

DANGER

Never jack up or crane load the industrial truck on

the tow coupling. The tow coupling is not designed

for this and may become deformed or destroyed.

The industrial truck can crash down. There is a risk

of fatal injury!

–

For jacking up and crane loading, use only the

designated lifting points.

–

Use the tow coupling only for towing.



Operation

Trailer and load

174

50078078001 EN - 07/2022 - 04

Содержание LXT 120





































































































































































































































































































































Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды

Still LXT 120, Оригинальное руководство пользователя

Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды