Still LTX 50 Скачать руководство пользователя страница 133

Страница: 133 / 286

Driving position with the operator on board the truck

General information for driving with the

operator on board the truck

The operator should drive the truck using the

controls located on the steering wheel and on

the dashboard.

DANGER

Risk of hitting shelving or objects during travel.
Keep all body parts inside the truck while driving.

Operator STANDING on board the truck

OM2386

2389

DANGER

Disabling or tampering with protective and safety

devices is strictly prohibited.
The mat (1) that detects the presence of the operator

must function correctly.
Do not place any objects on the platform mat (1) that

are heavy enough to activate the operator presence

detection switch.
The platform mat (1) must only be activated when

the operator is on board the truck. It is prohibited to

activate the platform mat (1) with body parts or ob-

jects while the operator is on the ground.

The correct driving position is:

●

Operator standing on board the machine
The seat (optional) must be fully closed.
The seat backrest must be at the correct

height (only if the seat backrest adjustment

option is fitted) for optimum ergonomics
Operator facing the truck front
Both of the operator's feet must be on the

operator presence detection mat (1) on the

platform.
Operator's back resting against the seat

backrest
Hands firmly on the steering wheel knob (if

one hand is required to hold packages,

items etc. then the other hand must be firm-

ly on the steering wheel).

Use

Drive modes and positions

123

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды