Still LTX 50 Скачать руководство пользователя страница 112

Страница: 112 / 286

Danger area

DANGER

Risk of injury! There is a risk of physical injury in-

side the danger area.

The danger area is the area in which people

are in danger from the forklift truck move-

ments, from its work equipment and from its

load lifting devices (e.g. accessories) or from

the load. The danger area also includes areas

in which a load could fall or in which work

equipment could lower or fall.
People in the danger area: Before starting the

truck and while you are working, ensure that

no one is in the danger area. If people are in

danger, warn them well in advance. Stop op-

erations with the truck immediately if people

do not leave the danger area despite warn-

ings.

Traffic route conditions

The surface of traffic routes must be sufficient-

ly level, clean and clear of objects. Drainage

channels, railway crossings and other similar

obstacles must be levelled and, if necessary,

fitted with ramps so that the truck can cross

without jolting.
There must be sufficient distance between the

highest part of the truck or the load and the

surrounding fixed installations. The height de-

pends on the lift height and the load dimen-

sion. Refer to the technical characteristics.
Maintain a suitable distance from any protrud-

ing objects and shelves.

Regulations regarding the traffic routes

and the manoeuvring areas

Only traffic routes authorised by the operator

or his agent may be used. Traffic routes must

be free of obstacles. Loads may only be un-

loaded and stored in places designed for this

purpose. The operator or his agent must en-

sure that no unauthorised person approaches

the working area.

Use

Authorised and safe use

102

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды