Still iGo neo CX-20 Скачать руководство пользователя страница 74

Страница: 74 / 112

Operating the iGo neo

Operating the truck in ASSISTANCE mode

Behaviour of the truck in response to obstacles in the roadway

DRIVE

STOP

DANGER

Danger of collisions with obstacles that the safety

laser scanner cannot detect.
Observe the notes about the limits to detecting

obstacles given in the chapter entitled "Function of

the safety laser scanner".
– Check the roadway above all for obstacles that

the safety laser scanner cannot detect and

remove these obstacles.

– If there is a risk of danger, immediately bring

the truck to a standstill by pressing one of the

emergency off switches.

If the truck detects an obstacle on the side of

the roadway to which the truck is aligned, the

truck automatically drives around the obstacle

and continues on its path (A).
If an obstacle is too large to drive around,

the truck will stop in front of the obstacle (B).

ASSISTANCE

mode is resumed without

intervention from the operator as soon as

the obstacle is removed.

50108046085 EN - 08/2017

Содержание iGo neo CX-20

















































































































Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Похожие инструкции для iGo neo CX-20

Бренды по названию

Популярные бренды

Still iGo neo CX-20, Инструкции к добавке

Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Похожие инструкции для iGo neo CX-20

Бренды по названию

Популярные бренды