Still iGo neo CX-20 Скачать руководство пользователя страница 48

Страница: 48 / 112

Components of the iGo neo

Remote control

switched on and the "Status" indicator light is

switched off. Charging resumes as soon as

the temperature returns to within the safety

limits.
– Only store the remote control for a pro-

longed period when the rechargeable bat-

teries are fully charged. If the remote control

is not used for an extended period of time

and the rechargeable batteries are nearly

empty, the service life of the remote control

can be signiﬁcantly reduced.

Maximum operating time of remote

control when the battery is fully charged

The maximum operating time of the remote

control when the battery is fully charged is

approx. 50 hours (at 20°C).

Changing the remote control

Each remote control has a unique pairing

code that is deﬁned by the manufacturer.

Remote controls are only able to control

the truck if the relevant pairing code has

been recognised by the receiving unit. This

prevents non-registered remote controls from

accessing the truck.
If a truck is to be controlled using a new or

additional remote control, the pairing code for

the remote control must ﬁrst be saved in the

receiving unit on the truck.
Each receiving unit can save a maximum of 20

pairing codes. If there are already 20 pairing

codes present and more codes need to be

saved, all existing pairing codes must ﬁrst be

deleted. Individual pairing codes cannot be

deleted from the memory of the receiving unit.
If multiple remote controls that are registered

to a truck attempt to access the truck simul-

taneously, the remote control that ﬁrst made

contact with the truck retains control. Other

remote controls do not receive access until the

ﬁrst remote control has stopped transmitting.

50108046085 EN - 08/2017

Содержание iGo neo CX-20

















































































































Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Похожие инструкции для iGo neo CX-20

Бренды по названию

Популярные бренды

Still iGo neo CX-20, Инструкции к добавке

Результаты поиска

Содержание iGo neo CX-20

Отзывы:

Похожие инструкции для iGo neo CX-20

Бренды по названию

Популярные бренды