Still HPT-20 Скачать руководство пользователя страница 26

Страница: 26 / 78

Definition of terms used for responsible persons

Operating company

The operating company is the natural or legal

person or group who uses the industrial truck

or on whose authority the truck is used.
The operating company must ensure that the

industrial truck is used only for its proper pur-

poses and in compliance with the safety regu-

lations in these operating and maintenance in-

structions.
The operating company must ensure that all

users read and understand the safety informa-

tion.
The operating company is responsible for the

scheduling and correct performance of regular

safety checks.
We recommend that the national performance

specifications are adhered to.

Qualified person

A qualified person is a fitter who works for the

manufacturer or is a person who meets follow-

ing requirements:

●

A completed vocational qualification that

demonstrably proves their professional ex-

pertise. This proof is to consist of a voca-

tional qualification or a similar document.

●

Professional experience indicating that the

qualified person has gained practical expe-

rience of industrial trucks over a proven pe-

riod during their career. During this time,

this person has become familiar with a wide

range of symptoms that require checks to

be carried out, such as based on the results

of a hazard assessment or a daily inspec-

tion.

●

Recent professional involvement in the field

of the industrial truck test in question and

an appropriate further qualification are es-

sential. The qualified person must have ex-

perience of carrying out the test in question

or of carrying out similar tests. Moreover,

such a person must also be aware of the

latest technological developments regarding

the industrial truck to be tested and the risk

being assessed.

Safety

Definition of terms used for responsible persons

50988046036 EN - 01/2021 - 01

Содержание HPT-20















































































Результаты поиска

Содержание HPT-20

Отзывы:

Бренды по названию

Популярные бренды

Still HPT-20, Оригинальное руководство пользователя

Результаты поиска

Содержание HPT-20

Отзывы:

Бренды по названию

Популярные бренды