Still FXD 20 Скачать руководство пользователя страница 22

Страница: 22 / 162

Safety regulations

These operating instructions, which come with

the truck, must be communicated to all those

concerned and in particular to personnel re-

sponsible for maintenance and driving. The

employer must make sure that the forklift op-

erator has properly understood all the safety

information.
Please observe the directives and safety regu-

lations attached, in particular:

●

Information concerning the use of materials

handling trucks

●

Regulations concerning traffic lanes and

working areas

●

Appropriate behaviour, rights and responsi-

bilities of the driver

●

Use in particular areas

●

Information about the weight and dimen-

sions of pallets or any other container

●

Information concerning starting, driving and

braking

●

Information concerning maintenance and

repair

●

Regular checks and technical inspections

●

Recycling of lubricants, oils and batteries

●

Residual risks.

Care is recommended both for the user and

the person in charge (employer) with regard to

adhering to all safety rules concerning the use

of material-handling trucks.
When instructing forklift operators, we recom-

mend the following points are emphasized:

●

The features of the truck

●

The special accessories

●

The specific features of the working envi-

ronment.

Train the user in how to drive the truck, until it

is under proper control.
Then, and only then, proceed to transferring

pallets.
Forklift truck stability is guaranteed when the

unit is used correctly.

Safety

Safety regulations

11648011751 EN - 02/2021 - 06

Содержание FXD 20



































































































































































Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды

Still FXD 20, Оригинальное руководство пользователя

Результаты поиска

Содержание FXD 20

Отзывы:

Похожие инструкции для FXD 20

Бренды по названию

Популярные бренды