Still FM-X Скачать руководство пользователя страница 92

Страница: 92 / 292

Operation

Commissioning

Checking the "automatic tilting

centre position" (variant) for correct

function

NOTE

The "automatic tilting centre position" lift mast

function (variant) must be executed whenever

the truck is commissioned.

The driver can use the "automatic tilting centre

position" function to position the tilt of the fork

arms to 0° automatically. Depending on the

truck version, either the fork carriage (fork tilt

device) alone or the entire lift mast (mast tilt

device) is positioned. In order to do this, the

push button must be pushed until the function

switches off automatically.
– Tilt the fork carriage or the entire lift mast

towards the drive side.

The fork carriage or the entire lift mast must tilt

fully to the drive side and move gently as far as

the end stop.
– Push the transition shift/tilt centre position

push button (1) on the right-hand side.

In the display and operating unit, the arrows

(2) pointing toward the "transition shift" symbol

must ﬂash until the centre position is reached
Once the function has switched off automati-

cally, the tilt of the fork arms must be in the 0°

position.
– Tilt the fork carriage or the entire lift mast

towards the load side.

The fork carriage or the entire lift mast must tilt

fully to the load side and move gently as far as

the end stop.

50988078001 [EN]

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды