Still FM-X Скачать руководство пользователя страница 194

Страница: 194 / 292

Operation

Operating in special operating situations

Towing

DANGER

The brake system on the towing vehicle may fail.

There is a risk of accident!
If the brake system of the towing vehicle is not

adequately sized, the vehicle may not brake safely

or the brakes may fail. The towing vehicle must be

able to absorb the tractive and braking forces from

the unbraked towed load (total actual weight of the

truck).
– Check the tractive and braking forces of the

towing vehicle.

DANGER

The truck could drive into the towing vehicle when

the towing vehicle brakes. There is a risk of acci-

dent!
When towing the truck, do not exceed the maximum

recommended speed of 2.5 km/h. When towing on

gradients, reduce speed to an absolute minimum

and keep wheel chocks at hand.

– Set down the load and lower the fork arms

close to the ground.

184

50988078001 [EN]

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды