Still FM-X Скачать руководство пользователя страница 165

Страница: 165 / 292

Operation

Battery change frame (variant)

Battery replacement area

Requirements for the battery replace-

ment area

There must be sufﬁcient space to allow the

change frames to be positioned and for the

truck to be driven through the area.
The battery replacement area must be hori-

zontal, level and have a sufﬁcient load capac-

ity.
There must also be enough space to allow the

operator to move safely around the change

frames and to operate the change frames.
There must be sufﬁcient room between

the truck and the surrounding building or

ﬁxed installations so that the operator and

passers-by can safely move around the area.

This area must be at least 0.5 m wide.
A ﬁrst aid kit suitable for accidents involving

acids must be available. Persons trained in

ﬁrst aid must be available and within calling

distance.

Requirements for positioning the change

frames

The transfer height of the frame and truck must

be aligned with one another; see the chapter

entitled "Battery change frame/Adjusting the

transfer height"
In order to move the battery in and out easily,

the roller channels must be set exactly hori-

zontal. Use a spirit level.
Wear of the truck wheels will change the

transfer height. In such instances, change

the height setting of the levelling feet.
When the truck and battery rack are positioned

relative to each other in accordance with the

speciﬁcations, the battery replacement can be

carried out.

50988078001 [EN]

155

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды