Still FM-X Скачать руководство пользователя страница 134

Страница: 134 / 292

Operation

Handling loads

Transporting swinging loads

Before transporting swinging loads, consult

the national regulatory authorities (in Ger-

many, the employer’s liability insurance asso-

ciations).
National regulations may place restrictions

on these operations. Contact the relevant

authorities.

DANGER

Swinging loads can result in the following risks:

• Impaired braking and steering movement
• Tipping over the load wheels or drive wheels
• Tipping the truck at right angles to the drive

direction

• Risk of crushing of guide persons
• Reduced visibility

DANGER

Loss of stability due to slipped, unstable or, in

particular, hanging loads!
The following information should be noted when

transporting hanging loads:

• Swinging of the load is to be prevented by

using the proper driving speed and driving

manner (careful steering, braking).

• Hanging loads must be coupled to the truck

in such a way that the harness cannot shift

or release unintentionally, and cannot be

damaged.

• Take particular care to ensure that there is

no one in the drive direction in the driving

lane.

• Ensure that swinging loads do not put

people at risk.

• When transporting hanging loads, suitable

devices (e.g. guy wires or hand rails) must

be made available and used by guide

persons.

124

50988078001 [EN]

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды