Still FM-X Скачать руководство пользователя страница 109

Страница: 109 / 292

Operation

Driving

Releasing the parking brake by pushing the

button
When the truck is ready for operation, the

driver can release the parking brake at any

time by pushing the button.
– Sit down on the driver’s seat.
– Push the push button (1) to release the

parking brake.

The parking brake is released audibly and the

symbol (2) on the display and operating unit

disappears.
Releasing the parking brake by starting to

drive
The parking brake can only be released by

starting to drive if it was applied automatically

by releasing the foot switch or vacating the

driver’s seat.
– Sit down on the driver’s seat.
– Select the drive direction (single-pedal

version only).

– Press the foot switch.
– Actuate the accelerator pedal.
The parking brake is released automatically

and audibly, and the symbol on the display

and operating unit disappears.

Functions of the parking brake when the

truck is moving

Actuation by the driver

NOTE

Braking with the parking brake while the

truck is in motion will result in heavy wear

of the brake linings. Therefore, always use

regenerative braking or the mechanical brake

to brake while the truck is in motion. Only use

the parking brake while the truck is in motion

in the event of an emergency.

– Ensure that you have a secure grip on the

truck; hold onto the steering wheel with your

left hand.

50988078001 [EN]

Содержание FM-X





































































































































































































































































































Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды

Still FM-X, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X

Отзывы:

Похожие инструкции для FM-X

Бренды по названию

Популярные бренды