Still FM-X EW Series, Оригинальное руководство пользователя

Страница: 89 / 360

Operation
4
Testing and activities before daily use
Component
Course of action
Antistatic belt, corona electrode
Perform a visual inspection for integrity.
Ensure cleanliness.
Make sure that the antistatic belt is still long enough
to touch the ground.
The discharge wires of the corona electrode must not
touch the ground. The wires discharge the energy to
the air.
Slide tracks of the reach carriage
Make sure that a film of grease is present on the slide
tracks of the reach carriage.
Gearbox
Make sure that no consumables are escaping from
the gearbox.
– Do not use the truck if there is any damage
or defects.
– In this case, contact your authorised service
centre.
Any other necessary tasks are summarised
under their own headings, e.g. adjusting the
driver's seat.
Climbing into and out of the truck
WARNING
Risk of injury when climbing into and out of the truck
due to slipping or becoming stuck!
If the footwell cover is very dirty, smeared with oil or
iced over, there is a risk of slipping. There is a risk
of getting caught by your clothing when climbing out
of the truck.
– Make sure that the step and the footwell of the
driver's compartment have a non-slip surface
and are not iced over.
– Do not wear loose-fitting workwear.
– Do not jump into or out of the truck.
– Ensure that you have a secure grip on the truck.
50988078001 EN - 10/2018 77