Still FM-X EW Series Скачать руководство пользователя страница 58

Страница: 58 / 360

Safety

Safety regulations for handling consumables

Oils

DANGER

Oils are ﬂammable!
– Follow the statutory regulations.
– Do not allow oils to come into

contact with hot engine parts.

– No smoking, ﬁres or naked ﬂames!

DANGER

Oils are toxic!
– Avoid contact and consumption.
– If vapour or fumes are inhaled,

move to fresh air immediately.

– In the event of contact with the

eyes, rinse thoroughly (for at least

10 minutes) with water and then

consult an eye specialist.

– If swallowed, do not induce

vomiting. Seek immediate medical

attention.

WARNING

Prolonged intensive contact with the

skin can result in dryness and irritate

the skin!
– Avoid contact and consumption.
– Wear protective gloves.
– After any contact, wash the skin

with soap and water, and then apply

a skin care product.

– Immediately change soaked

clothing and shoes.

WARNING

There is a risk of slipping on spilled oil, particularly

when combined with water!
– Spilt oil should be removed immediately with

oil-binding agents and disposed of according to

the regulations.

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды