Still FM-X EW Series Скачать руководство пользователя страница 46

Страница: 46 / 360

Safety

Basic principles for safe operation

• Only use wheels approved by the manufac-

turer.

• Only use high-quality products.
When changing wheels, always ensure that

this does not cause the truck to tilt to one side

(e.g. always replace right and left wheels at

the same time). Changes must only be made

following consultation with the manufacturer.
Wheels approved by the manufacturer can

be found on the spare parts list. If other

wheels are to be used, authorisation from the

manufacturer must be obtained beforehand.
– Contact your authorised service centre

regarding this matter.

Medical equipment

WARNING

Electromagnetic interference may occur on medical

devices!
Only use equipment that is sufﬁciently protected

against electromagnetic interference.

Medical equipment, such as pacemakers or

hearing aids, may not work properly when the

truck is in operation.
– Ask your doctor or the manufacturer of

the medical equipment to conﬁrm that the

medical equipment is sufﬁciently protected

against electromagnetic interference.

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды