Still FM-X EW Series Скачать руководство пользователя страница 39

Страница: 39 / 360

Safety

Basic principles for safe operation

NOTE

The brake resistor (1) is installed differently

depending on the battery group. The build-up

of heat in the area around the brake resistor

is harmless. The safety valve (2) opens when

the battery is subjected to over pressure or

catches ﬁre.

All lithium-ion batteries are associated with the

risk of a ﬁre starting, of the battery exploding

and of the battery causing chemical burns.
When used as intended, no hazardous

substances escape from the closed tray and

contact with toxic substances will not occur.

There is a risk of contact only in the event of

incorrect use (mechanical, thermal, electrical)

that leads to activation of the safety valve

or to the housing cracking. As a result, the

electrolyte ﬂuid may leak out, the electrode

material may react with humidity/water,

or battery venting/a ﬁre/or an explosion

can occur, depending on the surrounding

circumstances. The position of the safety

valve (2) on the battery depends on the battery

group.
Touching live components can lead to an

electric shock, which can have thermal or

paralysing effects. The latter can cause ven-

tricular ﬁbrillation, cardiac arrest or respiratory

paralysis, leading to death.
If a battery combusts, the resulting smoke or

vapours can cause irritation of the eyes, skin

and respiratory system.

Permissible lithium-ion batteries

– Use only lithium-ion batteries that have

been approved by STILL for use with this

truck. The dimensions of the battery must

precisely correspond to the dimensions

of the battery frame in the truck. The

installation of a smaller battery or a larger

battery poses a risk to the stability of the

truck.

– In addition, follow the operating instructions

provided by the battery manufacturer. The

lithium-ion battery must only be operated

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды