Still FM-X EW Series Скачать руководство пользователя страница 226

Страница: 226 / 360

Operation

Procedure in emergencies

Emergency lowering

DANGER

Risk to life if the load drops too quickly!
– Do not walk underneath the raised

load!

DANGER

If the truck is operated with the hydraulic controller

blocked, there is an increased risk of accident!
– After the emergency lowering procedure, have

the malfunction rectiﬁed.

– Notify your authorised service centre.

In the event of a power failure, the forks can

be lowered manually so that the truck can be

moved to a safe position.
The emergency lowering valve is operated

remotely by means of a ﬂexible drive. The

handle for operation is located on the reach

carriage near the mast ﬁxture.

WARNING

The load is lowered!
Control the speed by turning the handle of the

ﬂexible drive by a smaller or larger amount:
– Turning by a smaller amount: load is lowered

slowly.

– Turning a larger amount: load is lowered quickly.

– After ensuring that no persons are in the

vicinity of the truck, use the hexagon key (1)

to slowly release the emergency lowering

valve (2) so that the fork carriage can be

lowered.

– Ensure that the valve is re-tightened once

the forks have been lowered.

– Notify your authorised service centre.

214

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды