Still FM-X EW Series Скачать руководство пользователя страница 188

Страница: 188 / 360

Operation

Auxiliary equipment

Button for speed limitation, creep

speed (variant)

The maximum speed of the truck is temporarily

limited by pressing the "speed limitation"

button. After pressing the button, the truck can

be accelerated only up to the set maximum

speed. If the current driving speed is already

above this maximum speed, the truck is

regeneratively braked to the set maximum

speed. The value for the maximum speed can

be set by the authorised service centre.
– Press the button (1) to limit the maximum

speed to the set value.

The "tortoise" symbol (2) appears on the

display and operating unit.
– Press the button (1) again to remove the

speed limitation.

The "tortoise" symbol (2) on the display and

operating unit disappears.

Camera/monitor system (variant)

CAUTION

Risk of accident due to collision of the lift mast or

load with the racking or low ceilings.
– Also, when using the system, always consider

the vibration characteristics of the lift mast and

the load.

– Note that the camera image only shows a small

part of the surrounding area.

The camera/monitor system helps the driver

place loads into stock or remove loads from

stock at great lift heights. Using the cam-

era image, loads can be picked from and de-

posited at high levels without having to look

up, thus avoiding neck and shoulder strain.
– Refer to the manufacturer's operating

instructions for information about operation

of the camera/monitor system.

176

50988078001 EN - 10/2018

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды