Still FM-X EW Series Скачать руководство пользователя страница 187

Страница: 187 / 360

Operation

Auxiliary equipment

Speed limitation based on lift height

WARNING

There is always an increased risk of the truck tipping

if it is driven with a raised load.
The system is a support for the driver when placing

items into stock and removing items from stock.

The responsibility for safe operation and complying

with safety regulations remains with the driver.

Once a speciﬁed lift height has been ex-

ceeded, the truck can be accelerated only

up to a set maximum speed. If the current

driving speed is already above this maximum

speed, the truck brakes regeneratively to the

set maximum speed. The speed limitation is

removed as soon as the current lift height is

lowered to below the speciﬁed value.
The lift height and the value for the maximum

speed can be set by the authorised service

centre. The factory setting for the maximum

speed is 5 km/h.
While the maximum speed is being limited, the

"tortoise" symbol (1) appears on the display

and operating unit.

50988078001 EN - 10/2018

175

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Still FM-X EW Series, Оригинальное руководство пользователя, Страница: 187 / 360

Результаты поиска

Содержание FM-X EW Series

Отзывы: