Still FM-X EW Series, Оригинальное руководство пользователя

Страница: 172 / 360

4
Operation
Attachments
3
1
2
Controlling attachments (variant)
with the fingertip (5th/6th hydraulic
function)
The designation "5th/6th function" refers to
the fact that the four operating levers control
four functions, while additional functions can
be controlled by switching functions.
In this version, the attachments are controlled
using the operating levers (1).
You can also use the switch (2) to switch
functions. The operating lever marked with
a corresponding pictogram then controls the
5th/6th function.
The left and right parts of the pictogram (3)
behind the operating lever show the function
that is controlled with this lever.
This essentially involves the following:
Move the operating lever forwards.
• The attachment moves in the direction
shown in the left part of the pictogram.
Move the operating lever backwards.
• The attachment moves in the direction
shown in the right part of the pictogram.
– Actuate the switch (2).
The additional function of the attachment is
activated/deactivated and can be controlled
as an additional function using the operating
lever.
– Actuate the operating lever (1) in order to
control the attachment.
NOTE
The movement/action of these additional
functions can be found in the operating
instructions of the fitted attachment.
NOTE
The pictograms for the operating levers are
attached according to the attachments fitted to
this truck at the factory. If an attachment with
other functions is fitted, the pictograms must
be checked for the correct representation and
160 50988078001 EN - 10/2018