Still FM-X EW Series, Оригинальное руководство пользователя

Страница: 169 / 360

Operation
4
Attachments
WARNING
Use of attachments can give rise to additional
hazards such as a change in the centre of gravity,
additional danger areas etc.
Attachments must only be used for their intended
purpose as described in the relevant operating
instructions. Drivers must be taught how to operate
the attachments.
Loads may only be picked up and transported with
attachments if the loads are securely grasped and
attached. Where necessary, loads must also be
secured against slipping, rolling away, falling over,
swinging or tipping over. Note that any change to
the position of the load centre of gravity will affect
the stability of the truck.
– Refer to the capacity rating plate for the attach-
ments being used.
NOTE
Further variants and functions are available
in addition to the functions described below.
The directions of movement can be seen on
the pictograms on the operating devices or
battery hood.
NOTE
All the attachments described fall into the
category of equipment variants. An exact de-
scription of the respective movements/actions
of the attachment fitted can be found in the
respective operating instructions.
3
1
2
Controlling attachments (variant)
using the joystick 4Plus (5th/6th
hydraulic function)
The designation "5th/6th function" refers to
the fact that the four operating levers control
four functions, while additional functions can
be controlled by switching functions.
In this version, the attachments are controlled
using a joystick.
For operating attachments, the following is
generally involved:
The pictogram (3) on the base of the joystick
shows the function in each case and how it is
controlled using the joystick (2).
50988078001 EN - 10/2018 157