Still FM-X EW Series Скачать руководство пользователя страница 161

Страница: 161 / 360

Operation

Handling loads

– Never drive with a load protruding on

one side or with a load shifted to the side

(sideshift). The centre of gravity of the

load must always be positioned on the

longitudinal axis of the truck.

Setting down loads

DANGER

Risk of accident due to changed moment of tilt!
Please note that when the load is raised the lift mast

can be tilted far enough forward to cause the truck

to tip over.
The load centre of gravity and the moment of tilt

both change when the load slips. The truck may tip

forwards.
– Only tilt the lift mast forwards with a raised lifting

accessory when it is directly above the stack.

– When the lift mast is tilted forwards, take parti-

cular care to ensure that the truck does not tip

forwards and that the load does not slip.

WARNING

Risk of accident from falling load!
If the fork or the load remains suspended during

lowering, the load may fall.
– When removing from stock, move the truck far

enough back so that the load and the fork can be

lowered freely.

– With the load lowered in accordance with

regulations, approach the racking and align

the load as accurately as possible.

– Brake.
– Tilt the fork arms or lift mast until the fork

arms are horizontal.

50988078001 EN - 10/2018

149

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды