Still FM-X EW Series Скачать руководство пользователя страница 127

Страница: 127 / 360

Operation

Driving

180° steering (variant)

The steering wheel has no mechanical stops

and can be continuously turned.
The path of travel (1) is determined by turning

the steering wheel. The maximum steering

angle of the steered wheel is 90° to each

side. To reverse the drive direction, the drive

direction switch must be actuated.
The drive direction indicator on the display and

operating unit shows the actual drive direction.

Reverse steering (variant)

If the steering wheel is turned clockwise when

travelling in the load direction, the truck will

move to the right. If the steering wheel is

turned anticlockwise when travelling in the

load direction, the truck will move to the left.
Trucks with reverse steering are marked with

an adhesive label (1) next to the steering

wheel adjustment mechanism.

Emergency operation of the reach

measurement system

When driving over bumps or foreign bodies in

the reach measurement system, the system

can temporarily lose the current shift position.

If the reach travel position cannot be mea-

sured, the measurement system operates

only in emergency operation.

50988078001 EN - 10/2018

115

Содержание FM-X EW Series









































































































































































































































































































































































Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X EW Series, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X EW Series

Отзывы:

Бренды по названию

Популярные бренды