Still FM-X 10 N Скачать руководство пользователя

Страница: 64 / 380

Commissioning FleetManager™ (variant)

Activating the access control af-

ter delivery of the truck

CAUTION

Danger associated with use by unauthorised persons
The FleetManager™ regulates the access authorisa-

tion to the truck. To activate the access control, the

FleetManager must be put into operation immediate-

ly following delivery. This ensures that only persons

authorised by the operating company have access to

the truck.
If the FleetManager is not put into operation immedi-

ately after delivery, the operator must convert the

truck to a different access control.

–

Put the FleetManager™ into operation immediate-

ly after delivery. Make the truck accessible only to

people who are authorised by the operating com-

pany.

–

In order to convert the truck to a different access

control, contact your authorised service centre.

The FleetManager™ regulates the access au-

thorisation to the truck via a PIN code, access

chip or access card. This means that the truck

is effectively protected against unauthorised

access. The system can only be activated at

the customer's premises, as it uses essential

customer data. Therefore, at the time of deliv-

ery, the truck is not protected against unau-

thorised use.
In order to guarantee protection, the Fleet-

Manager™ must be put into operation immedi-

ately after delivery. The operating company is

responsible for ensuring that only authorised

personnel use the truck.
If the operating company decides not to use

the FleetManager™ at a later date, the oper-

ating company is responsible for the conver-

sion of the truck to a different access control.

Emissions

The values specified apply to a standard truck

(compare the specifications in the "Technical

data" chapter). Different tyres, lift masts, addi-

tional units etc. may produce different values.

Safety

Commissioning FleetManager™ (variant)

50988078001 EN - 11/2021 - 10

Содержание FM-X 10 N





























































































































































































































































































































































































Результаты поиска

Содержание FM-X 10 N

Отзывы:

Похожие инструкции для FM-X 10 N

Бренды по названию

Популярные бренды

Still FM-X 10 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X 10 N

Отзывы:

Похожие инструкции для FM-X 10 N

Бренды по названию

Популярные бренды