Still FM-X 10 N Скачать руководство пользователя страница 42

Страница: 42 / 380

disconnected. Contact the authorised service

centre on this matter.
In the event of the manufacturer going into liq-

uidation and the company not being taken

over by another legal person, the operating

company can make changes to the truck.
To do so, the operating company must fulfil

the following prerequisites:
Design documents, test documents and as-

sembly instructions associated with the

change must be archived and remain accessi-

ble at all times.
The capacity rating plate, decal information,

hazard warnings and the operating instruc-

tions must be checked to ensure they are con-

sistent with the changes and modified if re-

quired.
The modification must be designed, checked

and implemented by a design office that spe-

cialises in industrial trucks in accordance with

the standards and directives valid at the time

the modification is made.
Decal information with the following data must

be permanently affixed to the truck so that it is

clearly visible:

–

Type of modification

–

Date of modification

–

Name and address of the company imple-

menting the modification.

Modifications to the overhead

guard and cabs

DANGER

Work on the overhead guard or on the weather pro-

tection cab/cold store cab reduces its stability. A

falling load or the truck tipping over can cause the

modified chassis, bodywork and fittings to fail.

There is a risk of fatal injury!

–

Do not weld on the overhead guard or the weather

protection cab/cold store cab.

–

Do not drill on the overhead guard or the weather

protection cab/cold store cab.

–

Do not make any incisions on the overhead guard

or the weather protection cab/cold store cab.

Safety

Basic principles for safe operation

50988078001 EN - 11/2021 - 10

Содержание FM-X 10 N





























































































































































































































































































































































































Результаты поиска

Содержание FM-X 10 N

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X 10 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X 10 N

Отзывы:

Бренды по названию

Популярные бренды