Still FM-X 10 N Скачать руководство пользователя страница 258

Страница: 258 / 380

–

Observe the information provided by the

battery manufacturer regarding the proce-

dure in the event of a fire.

Battery weight and dimensions

DANGER

Risk of tipping due to change in battery weight!
The battery weight and dimensions affect the stability

of the truck. When replacing the battery, the weight

ratios must not be changed. The battery weight must

remain within the weight range specified on the

nameplate.

–

Do not remove or change the position of

ballast weights.

–

Observe the battery weight.

General safety regulations for lithium-

ion batteries

The following safety regulations generally ap-

ply to operating lithium-ion batteries.

–

Comply with the specifications stated in the

safety data sheets of the battery manufac-

turer.

–

Protect the battery against mechanical

damage to prevent internal short circuits.

–

If batteries have even the slightest external

damage, dispose of them in accordance

with national regulations for the country in

which they are being used.

–

Do not expose batteries directly to continu-

ously high temperatures or heat sources,

such as direct sunlight.

–

Train employees in how to handle lithium-

ion batteries correctly.

Operating

Handling the lithium-ion battery (variant)

246

50988078001 EN - 11/2021 - 10

Содержание FM-X 10 N





























































































































































































































































































































































































Результаты поиска

Содержание FM-X 10 N

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X 10 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X 10 N

Отзывы:

Бренды по названию

Популярные бренды