Still FM-X 10 N Скачать руководство пользователя страница 25

Страница: 25 / 380

Information about the documentation

Documentation scope

●

Original operating instructions

●

Original operating instructions for attach-

ments (variant)

●

Spare parts list

●

Depending on the truck equipment, "UPA"

operating instructions may also be provided

NOTE

Refer to the additional information in the sec-

tion entitled "Rules for the operating company

of industrial trucks".

These operating instructions describe all

measures necessary for the safe operation

and proper maintenance of the truck in all pos-

sible variants available at the time of printing.

Special versions to meet customer require-

ments (UPA) are documented in separate op-

erating instructions. If you have any questions,

please contact your authorised service centre.

Enter the production number and year of man-

ufacture from the nameplate in the space pro-

vided:

Production number:
Year of manufacture:

Please quote the production number in all

technical enquiries.
Each truck comes with a set of operating in-

structions. These instructions must be stored

carefully and must be available to the driver

and operating company at all times. The stor-

age location is specified in the chapter entitled

"Overviews".
If the operating instructions are lost, the oper-

ating company must obtain a replacement

from the manufacturer immediately.
The operating instructions are included in the

spare parts list and can be reordered as a

spare part.
The personnel responsible for operating and

maintaining the equipment must be familiar

with these operating instructions.

Foreword

Information about the documentation

50988078001 EN - 11/2021 - 10

Содержание FM-X 10 N





























































































































































































































































































































































































Результаты поиска

Содержание FM-X 10 N

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X 10 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X 10 N

Отзывы:

Бренды по названию

Популярные бренды