Still FM-X 10 N Скачать руководство пользователя

Страница: 201 / 380

CAUTION

Risk of component damage.
Adjustment of the driver's compartment must only be

carried out in the seated position by persons weigh-

ing a maximum of 150 kg.

–

Observe the total permissible weight during ad-

justment of the driver's compartment.

NOTE

Before operating the seat-adjustment mecha-

nism, make sure that there is sufficient clear-

ance between the driver's seat and the side

wall. This will ensure that the driver's seat is

not damaged when it is raised.

The electrical driver's compartment adjust-

ment mechanism, together with the adjust-

ment mechanisms for the seat and for the

steering column, is a system that allows the

driver's compartment to be adapted as effec-

tively as possible. The position of the driver's

seat and the pedal plate are electrically adjus-

ted in proportion to one another.

–

Press the rocker switch (1) in the operating

panel up or down until the optimum working

position is reached.

A scale (2) in the footwell of the driver's com-

partment gives an indication of the setting to

help you remember it.

Overhead guard with optimised

visibility (variant)

The overhead guard with optimised visibility

features a roof panel made of safety glass.

The view of the load is not restricted by struts

in the field of vision.

Operating

Auxiliary equipment

189

50988078001 EN - 11/2021 - 10

Содержание FM-X 10 N





























































































































































































































































































































































































Результаты поиска

Содержание FM-X 10 N

Отзывы:

Похожие инструкции для FM-X 10 N

Бренды по названию

Популярные бренды

Still FM-X 10 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X 10 N

Отзывы:

Похожие инструкции для FM-X 10 N

Бренды по названию

Популярные бренды