Still EXV-CB 06, Оригинальное руководство пользователя

Страница: 77 / 142

Raising/lowering the mast
Raising the mast:
–
Press button (2).
The forks are raised.
Lowering the mast:
–
Press button (1).
The forks are lowered.
When the lifting control (1) is released, the
forks stabilise at the required height.
NOTE
A groove (3) is present on each side of the
button. This helps you to feel the button and to
identify it even if there is not much light.
Operation of the mast tilt
The mast tilt ensures that the truck remains
stable by adapting the position of the centre of
gravity. This adaption facilitates the lifting and
moving of heavy loads.
Mast tilt
Proceed as follows:
–
Lower the tiller (move it into the driving po-
sition).
–
Pull the tilt control button (4) towards the till-
er in the (5) direction.
The forks tilt upwards and the mast tilts to-
wards the chassis.
–
Release the tilt control button (4) when the
required mast tilt is reached.
Returning the mast to the vertical position
Proceed as follows:
–
Lower the tiller (move it into the driving po-
sition).
–
Push the tilt control button (4) towards the
mast in the (6) direction.
The forks tilt towards the ground and the mast
returns to the vertical position.


Use
4
Transporting loads
67 11718011551 EN - 02/2021 - 05