Still EXU-S 22 Скачать руководство пользователя страница 48

Страница: 48 / 122

Application

Truck transport and lifting

There must be sufﬁcient distance between

the highest part of the truck or the load and

the surrounding ﬁxed installations. The

height depends on the lift height and the

dimensions of the load. Refer to the technical

characteristics.

Regulations regarding the trafﬁc routes

and the manoeuvring areas

Only trafﬁc routes authorised by the operator

or his agent may be used. Trafﬁc routes

must be free of obstacles. Loads may only

be unloaded and stored in places designed

for this purpose. The operator or his agent

must ensure that no unauthorised person

approaches the working area.

Hazards

Hazards on the trafﬁc routes must be signalled

by standard road signs or possibly by addi-

tional warning notices.

Truck transport and lifting

OM0747

Transporting the truck

The forklift is normally transported by road

and rail. If the forklift's dimensions exceed

the max. clearance size allowed, it is trans-

ported disassembled. The sales network is

in charge of the disassembly and reassembly

operations. The forklift must be secured to the

transport means during transport using appro-

priate restraint systems. Block the wheels with

wedges to prevent even the slightest move-

ment.

Transport

– Shut down the truck with the key switch.
– Disconnect the battery connector.

50018043464 EN - 10/2017

Содержание EXU-S 22



























































































































Результаты поиска

Содержание EXU-S 22

Отзывы:

Похожие инструкции для EXU-S 22

Бренды по названию

Популярные бренды

Still EXU-S 22, Оригинальное руководство пользователя

Результаты поиска

Содержание EXU-S 22

Отзывы:

Похожие инструкции для EXU-S 22

Бренды по названию

Популярные бренды