Still EXH-S 20 Скачать руководство пользователя страница 93

Страница: 93 / 132

Handling the truck in specific situations

Slinging the truck

DANGER

Danger of truck falling
Only use slings and a hoist of sufficient quality.
Check the weight of the machine (including battery)

in order to choose a suitable device.
Refer to the technical features.

Observe the following instructions:

–

Lower the load arms (the initial lift must be

in the lowered position).

–

Switch off the truck and disconnect the bat-

tery connector.

–

Remove any items that could fall.

–

Protect all parts that come into contact with

the lifting device.

–

Attach the lifting device (1).

NOTE

Do not sling the truck by the tiller. Do not sling

the truck by the accessory support.

–

Carefully lift the truck.

DANGER

Risk of falling
Make sure no one is under or near the truck when

slinging the truck.



Use

Handling the truck in specific situations

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 93 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: