Still EXH-S 20 Скачать руководство пользователя страница 84

Страница: 84 / 132

CAUTION

Risk of damage to the mains cable due to frequent

operator handling. Risk of electric shock and/or

burns!
The mains cable must be regularly checked as part

of periodic statutory checks and maintenance opera-

tions.

NOTE

The on-board charger is not compatible with

the Cold Store option.

Order picking

Maintenance personnel

The battery must be replaced by specially

trained personnel. Personnel must follow the

manufacturer's instructions for the battery, the

charger and the truck.
It is also necessary to follow the battery main-

tenance instructions.

Fire protection measures

WARNING

Do not smoke or create a flame when

handling batteries. There must be no

combustible material or tools that pro-

duce sparks within a minimum radius of

2 m around the truck and the battery

charger.
The work area must be well ventilated.

Fire extinguishers must be provided and

located near the work area.

Parking the truck securely

When the battery is being worked on, the truck

must be parked safely. The truck can only be

restarted when the covers and connectors

have been put back in the operating position.

Use

Handling the battery

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 84 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: