Still EXH-S 20 Скачать руководство пользователя страница 71

Страница: 71 / 132

Using the load arms

WARNING

Appropriate use of the equipment
Only use the lifting device and the accessories for

the work for which they are intended.
The operator must receive instruction on the opera-

tion of the load lift system.

WARNING

Risk of injury
The safety instructions must be strictly adhered to.
Do not touch or stand on moving parts (e.g. lifting de-

vice, pushing devices, work installations, load lifting

devices).

WARNING

Risk of injury
Never put your hands near the load lift system.

The initial lift controls are located on the steer-

ing wheel. As an option, they can also be loca-

ted behind the steering wheel.
Raising the load arms:

–

Press the button (1).

The load arms are raised.
Lowering the load arms:

–

Press the button (2).

The load arms are lowered.



Use

Transporting loads

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 71 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: