Still EXH-S 20 Скачать руководство пользователя страница 68

Страница: 68 / 132

Using the on-board compres-

sor option

The on-board compressor option allows you to

automatically pressurise the shock-absorbing

platform bellows.
This shock-absorbing platform reduces the vi-

brations felt within the truck while driving. It

can be adjusted in accordance with the weight

of the forklift operator.
To increase the shock absorbency:

–

Press the + button (1) located on the dash-

board.

To decrease the shock absorbency:

–

Press the - button (2) located on the dash-

board.

Using the foot protection op-

tion

A foot protection option (Active Foot Guard) is

available on the truck.
If the forklift operator removes his or her foot

from the control area (1), the speed of the

truck is automatically reduced. The forklift op-

erator can accelerate again as soon as his or

her feet are inside the driver's compartment.

NOTE

Clean the optical display of the sensor and the

reflectors to ensure optimal operation.



Use

Using the on-board compressor option

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 68 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: