Still EXH-S 20 Скачать руководство пользователя страница 58

Страница: 58 / 132

●

The forklift operator leaves the platform that

detects the presence of the forklift operator

●

The forklift operator presses the emergency

off switch

●

The drive switch is in the neutral position

●

The power supply is cut off

Horn

The horn is positioned on the steering wheel.
It is used:

●

On routes where there is poor visibility

●

At junctions

●

In the event of immediate danger

–

Press the button (1).

The horn sounds.

Drive program

The indicator light (1) is permanently on during

operation of the truck. The shape of the indi-

cator light indicates the selected program.
The truck is equipped with two different drive

programs:

●

Tortoise mode (2).

●

BlueQ mode (3).

NOTE

When the operator restarts the truck, the last

mode selected is automatically activated.

NOTE

The drive program is instantly changed. If the

operator changes mode while driving the

truck, he must remain vigilant.



Use

Driving

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 58 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: