Still EXH-S 20 Скачать руководство пользователя страница 30

Страница: 30 / 132

Safety tests

Regular safety inspection of the

truck

Safety inspection based on time and ex-

traordinary incidents

The operating company (see chapter entitled

"Definition of responsible persons") must en-

sure that the truck is checked by a specialist

at least once a year or after noteworthy inci-

dents.
As part of this inspection:

●

A full check of the technical condition of the

truck in terms of accident safety must be

performed

●

The truck must be thoroughly checked to

detect any damage that may have been

caused by improper use

●

A test log must be created.

The results of the inspection must be retained

until at least a further two inspections have

been carried out.
The inspection date is indicated by an adhe-

sive label on the truck.

–

Arrange for the service centre to perform

periodic safety inspections on the truck.

–

Observe the guidelines for tests carried out

on the truck in accordance with FEM 4.004.

The operator is responsible for ensuring that

any defects are remedied immediately.

–

Contact your service centre.

NOTE

Observe the regulations in force in your coun-

try.

Regelmäßige Prüfung

(FEM 4.004)

nach nationalen Vorschriften
basierend auf den EG-Richtlinien:
95/63/EG, 99/92/EG, 2001/45/EG

Die Prüfplakette ersetzt nicht das Prüfprotokoll

Nächste Prüfung

56344391019

Mitglied der:
Fédération
Européene
de la Manutention

STILL GmbH Hamburg

0000_003-001_V3



Safety

Safety tests

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 30 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: