Still EXH-S 20 Скачать руководство пользователя страница 110

Страница: 110 / 132

Steering and wheels

Cleaning the pinion gear of the

steering geared motor

–

Immobilise the truck.

–

Lower the load arms.

–

Switch off the ignition and remove the key.

–

Press in the emergency off switch.

–

Open the battery hood.

–

Disconnect the battery connector.

–

Remove the hood of the technical compart-

ment.

–

Check that the pinion gear and the ring gear

(1) are free from dirt.

–

Clean with solvent if necessary, then dry

with compressed air.

CAUTION

Use of compressed air
It is advisable to wear protection goggles and a

mask.

–

Then lubricate the pinion and ring gear with

silicone aerosol spray.

–

Reconnect the battery connector.

–

Return the truck to service.

CAUTION

Risk of dust clogging
There is a risk of dust clogging if non-recommended

products are used for greasing.

CAUTION

Risk of injury
It is advisable to wear gloves when carrying out

maintenance on the pinion and the turntable.



Maintenance

Steering and wheels

100

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 110 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: