![Still EXG-10 Скачать руководство пользователя страница 11](http://html.mh-extra.com/html/still/exg-10/exg-10_original-instructions-manual_1379933011.webp)
Introduction
1
Information about documentation
Information about documentation
Documentation scope
• Operating instructions document
• Operating instructions for attachment parts
(special equipment)
• Spare parts catalogue
• VDMA rules for the proper use of industrial
trucks
These operating instructions describe all mea-
sures necessary for the safe operation and
proper maintenance of the truck in all possible
variants at the time of printing. Special de-
signs to meet customer requirements are doc-
umented in separate operating instructions. If
you have any questions, please contact your
service centre.
Enter the production number and the year of
manufacture located on the designation plate
(see "Marking chapter") in the field provided:
Production no. ...........................................
Year of manufacture
...................................................
Please quote these numbers for all technical
enquiries.
Operating instructions are provided with each
truck. These instructions must be stored
carefully and must be available to the driver
and operator at all times.
If the operating instructions are lost, the oper-
ator must immediately request a replacement
from the manufacturer.
Personnel responsible for operating and
maintaining the equipment must be familiar
with these operating instructions.
The operating company (see "Definition of
responsible persons" chapter) must ensure
that all operators have received, read and
understood these instructions.
Thank you for reading and complying with
these operating instructions. If you have any
questions or suggestions for improvements,
or if you have found any faults, please contact
your service centre.
Copyright and property rights
This manual - and any excerpts thereof - may
not be reproduced, translated or transmitted
in any form to third parties without the express
written permission of the manufacturer.
Explanation of symbols used
DANGER
Compulsory procedure that must be followed to
avoid life-threatening danger or physical harm.
WARNING
Compulsory procedure that must followed to avoid
injury.
CAUTION
Compulsory procedure that must be followed to
avoid damage to and/or destruction of equipment.
NOTE
For technical requirements that require
special attention.
1170 801 15 09 [EN]
5
Содержание EXG-10
