Still EXD-SF 20 Скачать руководство пользователя страница 61

Страница: 61 / 150

Use

Driving

Horn

The horn is positioned on the inner side of the

tiller.
It is used:
• On routes where there is poor visibility
• At junctions
• In the event of immediate danger
– Press the button (1) .
The horn sounds.

Drive program

The indicator light (1) is on during operation

of the truck. The shape of the indicator light

indicates the selected program.
The truck is equipped with three different drive

programs:
• Hare mode (3)
• BlueQ mode (4)
• Tortoise mode (2)

NOTE

When the operator restarts the truck, the last

mode selected is automatically activated.

NOTE

The drive program is instantly changed. If

the operator changes mode while driving the

truck, he must remain vigilant.

Hare mode

When Hare mode is selected on the screen,

the truck operates at its maximum perfor-

mance.

11638011651 EN - 09/2019

Содержание EXD-SF 20























































































































































Результаты поиска

Содержание EXD-SF 20

Отзывы:

Похожие инструкции для EXD-SF 20

Бренды по названию

Популярные бренды

Still EXD-SF 20, Оригинальное руководство пользователя

Результаты поиска

Содержание EXD-SF 20

Отзывы:

Похожие инструкции для EXD-SF 20

Бренды по названию

Популярные бренды