Still EXD-SF 20, Оригинальное руководство пользователя

Страница: 52 / 150

4
Use
Using the display-operating unit
Using the display-operating unit
Selection buttons
The operator selects the menus using the four
selection buttons:
• The Blue Q button (1) to select Blue Q
mode, hare mode or tortoise mode
• The left arrow button (2) to scroll left through
the drop-down menu
• The right arrow button (3) to scroll right
through the drop-down menu
• The confirm button (4) to confirm the
highlighted choice on the screen
Operation of the display unit
Managing battery charging
The operating unit shows the battery charge
level.
The operator can refer to the battery icon (1)
or (2).
The number of bars shown indicates the
battery charge level.
• From 0 to 20%: 1 bar
• From 21 to 40%: 2 bars
• From 41 to 60 %: 3 bars
• From 61 to 80 %: 4 bars
• From 81 to 100 %: 5 bars
The battery light (3) comes on in the event of a
deep discharge of the battery or in the event of
a fault.
Two distinct warnings may be displayed if the
battery charge is insufficient:
• 1) Less than 25% of charge remaining: the
(3) and (4) icons flash and an audible beep
sounds A warning message appears at the
icon (4) and remains on until the battery is
recharged
• 2) 20% of charge remaining: Three regular
beeps sound, lifting is restricted, the (3) icon
42 11638011651 EN - 09/2019