Still EXD-SF 20, Оригинальное руководство пользователя

Страница: 101 / 150

Use
4
Handling the battery
Changing the vertical access battery
To change the battery, proceed as follows:
– Immobilise the truck.
– Lower the forks.
– Switch off the ignition and remove the key.
– Press in the emergency off switch.
– Open the battery hood.
– Disconnect the battery connector.
– Attach the slinging hooks to the battery
compartment.
NOTE
Using secured hooks is recommended.
– Lift the battery. Take care not to hook onto
the upper bridge piece of the mast.
– Replace the battery.
– Position the new battery in the chassis.
– Remove the slinging hooks.
– Reconnect the battery connector.
– Close the battery hood.
– Return the truck to service.
Changing the side access battery
DANGER
Risk of trapping fingers
It is advisable to wear gloves when changing the
battery.
WARNING
Risk of injury
Safety shoes must be worn when changing the
battery.
Before handling, ensure that there is nobody
around the truck.
To remove the battery, we recommend that
you use a fixed roller frame or a truck with
11638011651 EN - 09/2019 91