Still EXD-S 20, Оригинальное руководство пользователя

Страница: 80 / 144

–
Raise the load arms (2) to lift the load from
the ground.
–
Lower load (Q1) again as close as possible
to load (Q2) before driving.
CAUTION
Risk of crushing goods
Make sure that there is enough space above load
(Q2) so as not to crush the top of the pallet.
–
Reverse the truck slowly to withdraw the
pallets from the racking.
CAUTION
The total load (Q1) + (Q2) must not exceed 2000 kg.
It is essential that Q1 is less than Q2 (see details on
reading the double pallet stacker label).
Transporting two loads
Observe the following recommendations:
●
The normal direction of travel is forwards.
●
Always travel up or down slopes with the
load uphill.
●
In the event of poor visibility, move slowly
and carefully and ask somebody to guide
you.
●
Do not travel with a load (Q1) on the forks if
there is no load (Q2) on the load arms
above 300 mm from the ground.
●
The heavier of the two loads (Q2) must be
placed on the bottom on the load arms.
●
Keep the upper load (Q1) as close as possi-
ble to load (Q2) at all times.
Setting down two loads
–
Carefully move the truck to the desired
area.
–
Raise the forks clearly above the level
where the load is to be placed.
–
Slowly move the loads towards the racking.
–
First of all, place the lower pallet on the
ground and then place the upper pallet on
the first level.


Use
4
Transporting loads
70 11638011751 EN - 02/2021 - 03