Still EXD 20 Скачать руководство пользователя страница 78

Страница: 78 / 146

Handling a single load

DANGER

Risk of truck falling
Do not stack the initial lift high.

Before picking up a load

Ensure that the load weight does not exceed

the capacity of the truck.

●

Refer to the nominal capacity specified on

the capacity label of the truck

●

Also ensure that the load is stable, well-bal-

anced, attached securely and centred to

avoid dropping any part of the load

●

Check that the width of the load is compati-

ble with the width of the forks

●

Check that the load is not damaged

CAUTION

Risk of injury
Safety shoes must be worn.
Transporting people is strictly prohibited. Do not use

the forks to lift a person.

DANGER

Risk of tipping
It is essential to slow down when approaching a cor-

ner or on wet ground.

CAUTION

Arrangement of loads
Do not touch nearby loads or loads positioned at the

side or in front of the load being handled.
Arrange the loads with a small space between them

to prevent them hooking onto one another.

DANGER

Risk of crushing fingers, hands and arms
Do not put your hands above the mast protection. Do

not disassemble the mast protection.

Use

Transporting loads

11638011551 EN - 02/2021 - 06

Содержание EXD 20



















































































































































Результаты поиска

Содержание EXD 20

Отзывы:

Похожие инструкции для EXD 20

Бренды по названию

Популярные бренды

Still EXD 20, Оригинальное руководство пользователя

Результаты поиска

Содержание EXD 20

Отзывы:

Похожие инструкции для EXD 20

Бренды по названию

Популярные бренды