Still EXD 20 Скачать руководство пользователя страница 42

Страница: 42 / 146

Technical description

EXD20 trucks are intended for stacking and

double stacking pallets and/or containers.
Model available:

●

EXD20 with proportional lifting and lowering

controls with initial lift

Model offered:
The Acc model: Pedestrian mode.

Features

Speed during pedestrian driving:
- 6 km/h unladen
- 6 km/h laden
EXD20 capacity:

●

In pallet truck mode: 2000 kg

●

In pallet stacker mode: 1000 kg

●

In double pallet stacker mode: 1000 kg on

the forks (main lift) and 1000 kg on the load

arms (initial lift)

Refer to the capacity plate.

Drive system

The truck drive system comprises:

●

1.5 kW traction motor

●

LAC microprocessor controller to control

traction and lift

●

ES30–24 steering unit

●

2.2 kW pump unit

Batteries

Power is supplied by:

●

A lead battery

●

A gel battery

●

Or a lithium-ion battery (the truck therefore

has specific characteristics)

The types of battery removal that are available

are as follows:

●

Vertical access

●

Side access

These different battery types are not available

on all models.

Steering

The ES30–24 electric steering offers driving

precision and easier manoeuvring.
The truck is equipped with a 0,185 kW asyn-

chronous steering motor.
The steering is controlled by a tiller.

Masts

The mast is lifted using the proportional tiller

control.
These masts are equipped with side lift cylin-

ders.
EXD20 trucks are equipped with:

●

S (standard) masts for heights ranging from

1574 to 2424 mm

●

D (duplex) masts for heights ranging from

1574 to 2424 mm

●

T (triplex) masts for heights of 2136 mm

The cylinders are equipped with end of travel

dampers, which enable the carriage to be low-

ered gradually.

Braking

The truck is equipped with two braking sys-

tems:
- An electric counter-current brake:

●

Upon releasing the drive switch

●

By reversing the drive direction

●

Controlled by the rear safety button

- An electromagnetic brake:

●

Electromagnetic safety brake, controlled by

the emergency off switch

●

Electromagnetic safety brake, controlled by

the upper or lower position of the tiller

●

Electromagnetic parking brake, applied

when the power supply is cut

Driver's compartment

The tiller groups together control functions:

steering, proportional lift, forward and reverse

Use

Technical description

11638011551 EN - 02/2021 - 06

Содержание EXD 20



















































































































































Результаты поиска

Содержание EXD 20

Отзывы:

Похожие инструкции для EXD 20

Бренды по названию

Популярные бренды

Still EXD 20, Оригинальное руководство пользователя

Результаты поиска

Содержание EXD 20

Отзывы:

Похожие инструкции для EXD 20

Бренды по названию

Популярные бренды