Still EXD 18 Скачать руководство пользователя страница 65

Страница: 65 / 146

Lift control elements

WARNING

Risk of injury
The safety regulations must be strictly adhered to.
It is strictly forbidden to touch or stand on moving

parts (e.g. lifting device, pushing devices, work in-

stallations, load lifting devices).

For safety reasons, the lift and traction func-

tions are inhibited when the tiller is in the rest

position.
The truck has two lift systems:

Main Lift

Fork arms lifting

–

Press the proportional control button (2).

Fork arms lowering

–

Press the proportional control button (1).

NOTE

A groove (3) is present on each side of the

button. This helps you to feel the button and to

identify it even if there is not much light.

The fork arms are lowered to the lowest posi-

tion. It is always possible to stop the move-

ment of the forks by releasing the buttons.



Use

Transporting loads

1160 801 15 51 EN - 02/2021 - 11

Содержание EXD 18



















































































































































Результаты поиска

Содержание EXD 18

Отзывы:

Похожие инструкции для EXD 18

Бренды по названию

Популярные бренды

Still EXD 18, Оригинальное руководство пользователя

Результаты поиска

Содержание EXD 18

Отзывы:

Похожие инструкции для EXD 18

Бренды по названию

Популярные бренды