Still EK-X10, Оригинальное руководство пользователя

Страница: 55 / 124

Operation
4
Daily commissioning
Battery compartment door
The side openings of the battery compartment
can be closed with battery compartment doors
if required. Two swing bolts hold the doors in
their positions.
To remove the battery compartment doors,
move the two rotary handles into the open
position by rotating them 90°. The battery
compartment doors can then be lifted from
their bottom fixing points.
CAUTION
The battery compartment doors may fall out after
the swing bolts have been opened.
When opening the swing bolts, hold the door with
the other hand.
CAUTION
Damaged swing bolts can no longer hold the battery
compartment doors securely.
If one of the swing bolts is damaged, the industrial
truck must not be used. Repair the swing bolt or
remove the battery compartment doors.
Daily commissioning
Checklist before starting work
WARNING
If, after having done the checks before starting
work any defects, regarding operating or traffic
safety are discovered, then steps have to be taken
immediately to properly and professionally repair
theses defects.
It is prohibited to continue operating the industrial
truck until the repairs have been completed.
Before starting work, the driver must make
sure that the industrial truck is in a safe
operating condition. General checks:
• Clarify whether a driver’s permit is manda-
tory in the country of application.
• The industrial truck may be operated only
when the covers and flaps are closed and
the covers are in place
Function check of the braking systems
• Check the function of th foot switch braking
function.
• Check the area around the foot switch brake
for foreign bodies.
• Check the reversing brake. The braking and
subsequent acceleration must be smooth
and without jerking.
• Check the brake function after actuating the
emergency off switch
• Check system function on End of aisle
braking*: Automatic braking with release,
creep speed switchover and complete stop.
5212 804 3001 EN - 02/2017 49