Still ECV 10 Скачать руководство пользователя страница 52

Страница: 52 / 106

Intended use of the trucks

CAUTION

This machine was designed for the transport and

storage on racks (pallet stackers only) of loads

packed on pallets or in industrial containers designed

for this purpose.
The dimensions and capacity of the pallet or contain-

er must be adapted to the load being transported and

must ensure stability.

The table of characteristics and performance attach-

ed to this user manual gives you the information you

need to check that the equipment is suitable for the

work being carried out.
Any specific usage must be authorised by the site

manager; an analysis of the potential risks associ-

ated with this usage will enable him to put in place

any necessary additional safety measures.

First use

Carried

out





Check forward and reverse driving control functions.

Check lifting and lowering control functions.

Check meter status.

Check brake system function.

Check the emergency off switch.

Check horn.

Check safety reverser function.

Check battery status.

Check steering function.

Check for oil leakage.

Check whether wheels are tightened.

Daily checks before use

Carried

out





Check operation switch, display equipment and component functions.

Check alarm system function.

Check the function of the interlock switch.

Check emergency power off function of emergency stop switch.

Check the function of the steering system.

Check travel switch setting function.

Operation

Intended use of the trucks

50028011505 EN - 03/2022 - 06

Содержание ECV 10











































































































Результаты поиска

Содержание ECV 10

Отзывы:

Бренды по названию

Популярные бренды

Still ECV 10, Оригинальное руководство пользователя

Результаты поиска

Содержание ECV 10

Отзывы:

Бренды по названию

Популярные бренды