Still ECU-14 Скачать руководство пользователя страница 53

Страница: 53 / 98

Use and Operation

Use of the truck

• Test that the electromagnetic brake works

effectively.

• Check that the battery harness is in good

condition.

• Check and test the battery electrolyte level

and density as indicated in the battery

instructions.

• The operator must be qualiﬁed to drive the

truck. The operator must be able to reach

the controls and operate them (especially

the anti-crush protective device). Do not

obstruct access to the controls.

Use of the truck

OM1774

Stopping the truck in an emergency

In case of emergency, take hold of the battery

plug (1) and, pulling upwards, remove it from

the battery socket.
This blocks all of the forklift functions; the

forklift will brake and stop.

45588043482 EN - 04/2016

Содержание ECU-14



































































































Результаты поиска

Содержание ECU-14

Отзывы:

Похожие инструкции для ECU-14

Бренды по названию

Популярные бренды

Still ECU-14, Оригинальное руководство пользователя

Результаты поиска

Содержание ECU-14

Отзывы:

Похожие инструкции для ECU-14

Бренды по названию

Популярные бренды